• Lubrication that's simple to maintain and completely submersible
• Allows grease to easily flow to both outer and inner bearings for a complete repack
• No disassembly required, just attach a grease gun at the end and inject the grease
• E-Z Lube cap allows for easy access, extra protection, and virtually no mess
• Easily purges contaminated grease without removing the hub
• Ideal for most towable axles

The E-Z Lube system allows grease to flow with ease to both the outer and inner bearings for a complete repack.  Axles equipped with this system can be periodically lubricated without removing the hubs from the axle.  This features consists of axle spindles that have been specially drilled and assembled with grease fittings in their ends.  When grease is pumped into the fitting, it is channeled to the inner bearing, then flows to the outer bearing, and eventually back out the grease cap hole.  The E-Z Lube end cap allows for easy access, extra protection, and virtually no mess.  The protection and maintenance features of Dexter's E-Z Lube system make it ideal for most towable axles.  E-Z Lube is designed to allow immersion in water.

E-Z Lube is a registered trademark of Dexter Axle Company.